تصميم وتنفيذ متتبع للطاقة الشمسية

Abstract
المستخلص : في الوقت الحاضر يزداد الاحتياج للطاقة بشكل يومي , معظم الطاقة المنتجة تعتمد على المصادر التقليدية كالبترول والفحم الحجري وهذه المصادر تسبب تلوث البيئة ,فهي تبعث الغازات الضارة إلى الغلاف الجوي مما يؤثر على الكائنات الحية وطبقة الأوزون مما يؤثر على المناخ .وهي تعتبر مكلفة مقارنة بالطاقة المتجددة , بالإضافة إلى كونها كثيرة الأعطال وتحتاج إلى صيانة دورية ومراقبة أثناء فترة تشغيلها , كل هذه الأسباب تدفعنا إلى استخدام الطاقة المتجددة والنظيفة كالرياح وضوء الشمس لتوليد الطاقة الكهربائية فهي صديقة للبيئة تعتبر الطاقة الشمسية من أهم مصادر الطاقة المتجددة لتوفرها خصوصا في الدول الحارة إضافة إلى ذلك توفر التكنولوجيا المستخدمة لتوليد الكهرباء من الطاقة الشمسية . ولتغطية الطلب المتزايد تم اللجوء إلى استخدام الطاقة الشمسية .ويتم استخدامها عن طريق تحويل أشعة الشمس إلى طاقة يمكن استخدامها في التطبيقات الكهربائية المختلفة ولكن المشكلة التي تعيق إنتاج اكبر قدر ممكن من الطاقة هو حركة الشمس وتغير موقعها خلال اليوم والسنة وللإستفادة القصوى من أشعة الشمس الساقطة كان لا بد من تحريك الالواح وجعل الشمس عمودية على الألواح .وللمحافطة علي هذا الوضع تم استخدام محركات الخطوة لتحريك اللوح تبعا لحركة الشمس .وهذا النظام تم التحكم فيه عن طريق استخدام متحكم اردوينو اونو الذي يستقبل البيانات من المقاومة الضوئية ويعالجها ويحولها إلى خرج للتحكم في حركة المحرك حسب الموضع المطلوب .وتم تصميم نموذج تجريبي لنظام التحكم التلقائي لتحقيق هدف المشروع. تنفيذ هذه المنظومة حقق موثوقية عالية بتكلفة مالية أقل بالإضافة إلى زيادة العمر الإفتراضي للتشغيل مقارنة مع مصادر الطاقة التقليدية. Abstract: Most of the energy produced depends on conventional sources such as petroleum and coal. These sources pollute the environment. They emit harmful gases into the atmosphere, affecting living organisms and the ozone layer, and thus affecting the climate. They are expensive compared to renewable energy, they are highly disruptive and require regular maintenance and monitoring during their lifetime. Solar energy is one of the most important sources of renewable energy, especially in the hot countries, as well as the technology used to generate electricity from solar energy. Converting sunlight to energy could be used in various electrical applications, but the problem with producing as much energy as possible was that the Sun moved and changed its position during the day and year, and to make maximum use of the incident sunlight, it was necessary to move the panels and make the Sun perpendicular to the panels. To preserve this position, step motors were used to move the panel according to the sun's motion. This system was controlled by the Arduino-Ono controller, who received and processed LDR data and converted it into an output to control the movement of the engine. An experimental model of an automatic control system was designed to achieve the project's goal. Implementing this system has achieved high reliability at lower financial cost and increased operating life compared to conventional power sources.
Description
Keywords
Citation
Collections